• Delay Time has different ranges in different Modes. Longer delay times
are achieved with clockwise turns.
• Regeneration is a level control for the amount of the signal that gets
fed back into the processor. Things can get wild - in both good and bad
ways - if you turn it up.
• Tone/Rate This control doubles as a tone or lowpass filter control for
the delays, and as a rate control in the Chorus and Flanger modes.
• Width/Depth specifies the amount of stereo field in the stereo delay/
reverberator, and the modulation depth of the LFO in the chorus and
flanger.
36 Arturia - MatrixBrute Manual - Operation
To Next Page
Loading...
