4.5.1.2. Transpose a pattern
Here's how to transpose a pattern while it is playing back:
1. Press Play to start the pattern
2. Hold the Transpose pad
3. Press the pad with the note name that corresponds to the desired transposition
amount. For example, pressing the D# pad while the Transpose pad is held will
shift the pattern up by a minor third.
4. To put the pattern back to the original pitch, hold Transpose and press the lowest
C pad.
5. If you have changed the Octave range by holding the Transpose button and
pressing the Octave -/+ pads, you will need to use those pads as well to restore
the pattern to its original pitch.
♪: Transposing a pattern does not transpose the pads; it only transposes the pattern. The pads will
remain at their original pitches.
26 Arturia - User Manual MiniBrute 2S - Hardware overview
To Next Page