7.13. Sequencer section
7.13.1. Clock
This jack will receive a clock signal to which the tempo-based components of the MiniBrute
2S can synchronize. To use an external source as the clock, tap the large Sync button until
the LED next to the word CLK is lit.
Use the MIDI Control Center [p.140] to instruct the MiniBrute 2S what sort of external clock is
being used as the sync reference: 1step (Gate), 1step (Clock), 1pulse (Korg), 24ppq, or 48ppq.
7.13.2. Reset
A trigger received at this connector will reset the sequence that is currently playing back to
its beginning.
The Sequencer section
78 Arturia - User Manual MiniBrute 2S - The Patch bay
To Next Page