Arturia MINIBRUTE 2S - Transport Section

8.3. Transport section
The Sequencer and Arpeggiator share the transport section. They will play, pause, stop
and restart at the same time. The only difference is that the Record button is not active
for the Arpeggiator, although you can capture an arpeggio by recording its output into the
Sequencer as you play the pads.
Here are a couple of quick reference charts for the transport-related features of the
Sequencer and the Arpeggiator. The top chart lists the shared features; the bottom chart lists
the independent features.
Click the embedded links to learn more about each feature.
Shared features Description
Play/Pause [p.93] Start and pause both Seq and Arp
Stop [p.93] Stop Seq and Arp; Play will start Seq/Arp from the beginning
Restart (Shift + Play)
[p.93]
Start Seq and Arp from the beginning. Works whether playing, paused, or
stopped.
Independent features Description
Step Record [p.102] Use pads to enable/disable steps (inactive for Arp mode)
Real-time Record [p.101] Play the pads to enter pitch, volume and gate length (inactive for Arp mode)
The MiniBrute 2S transport section
Arturia - User Manual MiniBrute 2S - Seq / Arp: shared features 85