5.3.3. Range
The Range switch sets VCO 2 to one of three tuning ranges:
• Fine: a full turn of the knob covers a range of more than an octave above and
below the center frequency
• All: a full turn of the knob will sweep VCO2 through the entire frequency range
of the MiniBrute 2S
• LFO: VCO2 can be used as an additional LFO with a wide frequency range (1Hz
to audio range). This is handy if you're already using LFOs 1 and 2 for other
modulations through the patch bay, for example.
34 Arturia - User Manual MiniBrute 2S - The top panel
To Next Page