5.5.4. Att 2 > Amp
Under ordinary circumstances the Att 2 > Amp knob is kept at the minimum position; this
allows the AD Envelope generator to open and close completely from silence to silence.
However, there may be times when a non-zero setting of this knob is very useful. For
example:
• To keep the amplitude at a constant level so you can program a sound with both
hands
• To create a drone patch that is constantly evolving as parameters are being
modulated via the patch bay
• To create a patch with an infinite decay/release time
The beauty of having a knob to control this parameter, rather than a switch that simply
forces the VCA to a never-ending maximum level, is that you can control the level at which
the envelope stays open.
40 Arturia - User Manual MiniBrute 2S - The top panel
To Next Page