5.6.7. ADSR Envelope sliders
These four sliders affect the Filter by default. Their functions are described extensively in the
Basics of Synthesis chapter [p.55].
♪: An LED indicator shows the envelope amount that is being sent to the filter. The LED’s brightness
depends on the envelope signal’s amplitude.
5.6.8. AD Envelope sliders
These two sliders affect the Amplifier by default. Their functions have been described
extensively here [p.15], but here's a quick review:
• The Attack slider sets the duration of the envelope’s first stage. The Attack time
ranges from 1ms to 14s.
• The Decay slider sets the duration of the AD envelope’s final stage. The Decay
time ranges from 1ms to 14s.
♪: An LED indicator shows the envelope amount that is being sent to the amplifier. The LED’s
brightness depends on the envelope signal’s amplitude.
The ADSR Envelope section
The AD Envelope section
Arturia - User Manual MiniBrute 2S - The top panel 43
To Next Page