Aruba JL253A - Page 9

Product
number
Model name 10/100/1000
non-PoE RJ-45
ports
1
10/100/1000
PoE/PoE+
RJ-45 ports
1
SFP ports
2
SFP+ ports
3
JL557A Aruba 2930F
48G PoE+ 4SFP
740W Switch
- 48 4 -
JL558A Aruba 2930F
48G PoE+ 4SFP
+ 740W Switch
- 48 - 4
JL559A Aruba 2930F
48G PoE+ 4SFP
+ 740W TAA
Switch
- 48 - 4
Notes:
1
All RJ-45 ports support “Auto-MDIX”, which means you can use either straight-through or crossover twisted-
pair cables to connect network devices to the switch.
2
SFP ports support 100Mb (100-FX) and 1G SFP transceivers.
3
SFP+ ports support 100Mb (100-FX), 1G SFP, and 10G SFP+ transceivers.
1000-T Copper (twisted-pair) RJ-45
1000-SX Fiber (multimode) LC
1000-LX Fiber (multimode or single mode) LC
1000-LH Fiber (single mode) LC
1000-BX Fiber (single mode) LC
These products also support optional network connectivity:
Table 4: Optional network connectivity, speeds, and technologies
Transceiver Form-Factor and Connector
1
Speed Technology Cabling SFP ("mini-GBIC")
Connector
SFP+ Connector
100 Mbps 100-FX Fiber (multimode) LC -
1000 Mbps 1000-T Copper (twisted-
pair)
RJ-45 -
1000-SX Fiber (multimode) LC -
1000-LX Fiber (multimode or
single mode)
LC -
1000-LH Fiber (single mode) LC -
1000-BX Fiber (single mode) LC -
10 Gbps 10-Gig Direct
Attach
Copper (twinaxial) - Not Applicable
Table Continued
Chapter 1 Introducing the 2930F switches 9