ARUSNAVI ELECTRONICS ARNAVI 5 - CAN Bus Handler Settings via SMS

USER MANUAL [1.4]
Page 19
TO ACTIVATE THE INTERNAL CAN INTERFACE (J1939 STANDARD), SPECIFY THE
PROGRAMME NUMBER – 3.
when it is not necessary to change the speed. The value ‘0’ disables the condition of sending to the
service by speed change.
<interval> – a number within the range from 5 to 65535 or 0. If the interval between the time of
the last sending of the coordinates to the server and the current time exceeds the specified value, the
current position will be sent to the server. Unit of measure: second. Is not a mandatory parameter: The
parameter is not required to be transmitted when it is not necessary to change the sending interval. The
value ‘0’ disables the condition of sending to the service by interval.
Examples:
‘123456*SETP*#5=400,18,20,150’ – set all trajectory processing parameters
‘123456*SETP*#5=,,35,300’ – change only the speed and interval, distance and angle
leave unchanged
‘123456*SETP*#5=,15’ – change only the angle
‘123456*SETP*#5=400,18,20,150, 1000,25,40,360’ – different modes for home and roaming
APN parameters of the SIM card’s mobile operator 2 – Parameter number: 7
Command format: ‘#7=<name>,<user_name>,<password>’
Arguments:
<name> – a string with a length of up to 32 symbols. Contains the name of the access point
<user_name> – a string with a length of up 32 symbols. Contains the user name of the access point
<password> – a string with a length of up 32 symbols. Contains the password of the access point
Examples:
‘123456*SETP*#7=internet,gdata,gdata’ – set the APN parameters of Megafon operator
‘123456*SETP*#7= , , ’ – clear the APN parameters(space key instead argument)
Changing the number of the CAN bus handler – Parameter number: 12
Command format: ‘#12=<programme_number>’
Arguments
<programme_number> – a number within the range from 0 to 3000.
Example:
‘123456*SETP*#12=188’ – set the programme number 188.