ARUSNAVI ELECTRONICS ARNAVI 5 - SMS AND TCP COMMAND LIST; SMS Control and Info Commands

USER MANUAL [1.4]
Page 50
SMS AND TCP COMMAND LIST
The tracker supports receiving and processing SMS and TCP commands. The description of all available
commands is presented in tables 6 - 8.
Таблица 6 - SMS commands:
Format
Command description
< access_password >*SETP*
<parameter_list>
Command to configure the tracker. Detailed description of
the command in the section "setting via SMS".
Control commands
< access_password >*SERV*1.1
Send a package with coordinates to the server immediately
< access_password >*SERV*1.4
Update the software via the web configurator even if
assigned and current versions coincide
< access_password >*SERV*1.5
Update the software via the web configurator if assigned
version differs from the current one
< access_password >*SERV*1.5.80
Update the software of the external CAN-module
< access_password >*SERV*1.7
Reboot
< access_password >*SERV*1.8
Download settings from the web configurator
< access_password >*SERV*1.9
Send the current settings to the web configurator
< access_password >*SERV*8.X.Y
Change the output status, where x – the output number (0 –
IN0 (U0), 1 – IN1 (U1), 2 – IN2 (U2), 3 – IN3 (U3)) and y –
the new status (0 – off, 1 – on));
< access_password >*SERV*20.0
Upload data from tachograph "Shtrih" to server
< access_password >*SERV*20.1
Upload data from tachograph "Shtrih" to server using second
SIM
< access_password >*CMD*zmcam
Take a photo (ZM Camera only).
< access_password >*CMD*foto
Take a photo (VC0607 Camera only).
Info commands
< access_password >*SMSI
Receive SMS with IMEI, ID and address of the monitoring
server 1
< access_password >*SMSK
Receive SMS with the coordinates and map link