Note: In the simplest case of setting the device only for the purpose of determining the location
of the mobile object (vehicle) without the use of inputs/outputs and other interfaces, it is enough to
select only the first two points
‘Package structures’: GPS/GLONASS coordinates and GPS/GLONASS settings. In this case, the data
traffic from the device to the server will be minimal, which will have a positive impact on the cost of
cellular communication.
Step 5 – For the efficient transmission of data to the server with consideration of traffic compression,
select the dataset to be transmitted to the server in ‘Packet structure’ section.
Step 6 – ‘Transmit track points and sensor values’ section. This section allows configuring the
parameters of the movement trajectory processing.
To Next Page
Loading...