Arylic S50 Pro - Device Interface and Controls

4
5. Interface
B
LED: to show the device status.
C
IR receiver: for remote control.
D
WiFi antenna: external WiFi antenna for better signal strength.
E
Reset: short press to reset the device WiFi, long press to restore the device to factory setting(only works
in WiFi mode), please change to WiFi mode when the device is in Bluetooth or line input mode.
F
Line input: for external audio sources from TV, CD player and so on.
G
Line output: to provide analog audio to other devices.
H
Coax output: to provide digital audio output to ampliers.
I
OPTICAL
：
digital audio output
J
LAN: Wired connection to your router
.
K
USB Host : to connect USB pen drive(1024 tracks at most)
L
Bluetooth antenna: external Bluetooth antenna for better Bluetooth signal strength.
M
Mirco USB: 5V/1A Micro USB input.