How To Use
App download
Download the 4STREAM application from App Store for iOS based devices and Google Play Store for Android based devices.
The application supports English, Spanish, French, German, Italian, Portuguese, Korean, Simplified Chinese, Traditional
Chinese and Japanese
First time usage & Wi-Fi Setup:
1. Hold the RESET button then plug in the power cable.
2. The LED light will start flashing, release the button and wait till the LED flash slowly.
3. Go to your mobile WIFI settings and search for Sound System_xxxx WiFi and connect.
*If you cannot find SoundSystem connection, long press the RESET button for 5 secs and then refresh your mobile’s
WiFi listing.
4. Open 4Stream APP and there will be 2 options: Direct Mode & Add Device.
5. Direct Mode: If you don’t have router, please choose direct mode. After connected, you can play music store in your
mobile.
6. Add Device: After you choose add device, select the router SSID you want your Up2stream device connect to (enter
password if required) and select continue.
7. Once connected, you can change the name of the device. You can select a preset one or enter your own.
8. After you define the name of the device, you will see it appears in the device list in 4stream app and now you can start
streaming music.
*If you change to another router, or the password of the connected router has been changed, please long press RESET
button for 5 secs in WiFi mode to reset the connection.
* Hold RESET button then plug in the power can force the device to enter WiFi mode. If you have setup router
connection before, the device will auto connect to that router.
*Attention for Android users
Different brand mobile phones may ask you to allow to use SoundSystem WiFi network, please choose yes, if not, you may
not able to set up successfully . It may also ask you to authorize other things, please choose yes or it may affect your usage.
Bluetooth
To use bluetooth ,please swtich to bluetooth via app or by remote controller,then find bluetooth device SoundSystem_XXXX
from your phone bluetooth setting and pair it .
USB audio
Connect the Up2Stream Mini to your PC with USB cable (make sure it’s a data cable including the signal wires). The PC will
automatically discover a USB sound card, and when you activated it as the system main output, the PC will send the audio
output over Up2Stream Mini in digital (44.1KHz/16bits). You can stream to other Up2Stream devices over multiroom
connection.
NOTE: there’s about 3 seconds delay for multiroom slave devices.
Audio Effects Tool
Connect the Up2Stream Mini to your PC with USB cable (make sure it’s a data cable including the signal wires). And open the
program ACP Workbench (only support Windows.), and you can tune audio effects conveniently, including Music Noise
Suppressor, Virtual Bass, Stereo Widener, Exciter, 10 bands EQ, etc. After editing the audio effects, you can save the
changes to the device so the tuned effects will remain. You can get ACP Workbench from our website www.arylic.com
Firmware update
The application will notify you in app when there is a new firmware version available. It’s recommended to update firmware
whenever available as this might not only correct bugs or improve security, but also can add new features or services.
To Next Page
Loading...
