12
Reverse gear (7)
To switch on the reverse gear, you must
release the drive lever. Reverse speed is half
of the forward speed.
0
I
Reverse gear on:
Press
the lever towards the
handlebar and continue
to hold.
Reverse gear off:
Release the lever.
Carburetor with choke and tickler
The choke (1) and the tickler (2) are required
for the cold engine start.
2
1
Opening the choke:
Turn clockwise to the
stop.
Closing the choke:
Turn anti-clockwise to the
stop.
Filling carburetor with
fuel:
Press the tickler briefly
until the fuel flow starts.
Fuel valve
1
2
1:
Open
2:
Closed
Assembly
Scope of delivery
The device is delivered in a carton.
The scope of delivery includes:
The device.
These operating instructions.
Warranty card.
Impact protection.
Tool bag with small items.
Unpacking
1. Remove the loose parts from the box.
2. Cut open the front side of the box.
3. Push the device out of the box.
Guide bar and handlebar
2
1
1. Flip the guide bar (1) backwards and
engage it with the bar fixing (
2).
3
124