ASCOM d62 Talker Configuration Manual

TD 92639EN
31 October 2013 / Ver. J
Configuration Manual
Ascom d62 DECT Handset
22
5.7 Call Diversion
User friendly call diversion menus can be configured in the handset using PDM/Device
Manager. These menus can then be selected in the handset by selecting Calls > Call services
> Divert calls.
Tip: Beside th
e default call diversion menus, up to ten system specific services codes can be
defined. See 5.6 Call Services.
1 Select Systems > System X (w
here X represents A - H).
2 Select PBX Settings > Diversion.
3 Select "Internal", "External", "On No Reply",
"On Busy", and/or "All Calls"; enter the
following:
• Prefix - the system specific prefix code to be used (if required by th
e PBX used)
• Suffix - the system specific code required t
o activate the diversion (for example
"*21*")
• Cancel - the system specific code required t
o deactivate the diversion (for
example "#23#").
The user can now enter the diversion number in the handset.
5.7.1 Call Diversion in Profiles
A handset can be configured to divert calls whe
n a certain profile is activated.
Note: The PBX settings
for call diversion must also be configured, see 5.7 Call Diversion.
1 Select User Profiles > User Profile X > Pre
sence and diversion.
2 Select which calls to be diverted (that i
s all call, internal calls etc.).
3In the Divert calls
to field, enter the phone number where the calls shall be diverted to
when the profile is activated.
4 Select "User Profile X".
5In the Name field
, enter an appropriate name of the profile.
Additional settings can be added f
or a profile, such as soft keys, sound and alert etc. See
5.39.1 User Profiles on
page 49.
5.8 Absence Handling
User friendly absence menus can be configured in the handset using PDM/Device Manager.
These menus can then be selected in the handset by selecting Calls > Call services > Absence
to set the reason why a call cannot be answered, for example when the user is in a meeting.
The calling party is notified about the absence reason when making the call.
In addition to the default absence menus, up to 1
0 extra system specific services codes can
also be defined, see 5.6 Call Services on
page 21.
1 Select Systems > System X (w
here X represents A - H).
2 Select PBX Settings > Absence.

ASCOM d62 Talker Specifications

General

Brand	ASCOM
Model	d62 Talker
Category	Handsets
Language	English