PRELIMINARY
Menu Operation
USER MANUAL
Ascom i63 VoWiFi Handset
Deactivate the Automatic Key Lock
1 Select Locks. The Locks menu is displayed.
2 Select Automatic key lock menu item and select Off.
Automatic Key Unlock
The user can configure a locked keypad to unlock automatically when a call or message is received. After
the user has serviced the call or message, the keypad is locked again after the specified Auto lock time
expires.
8.7.3 Phone Lock Settings
The handset can be protected for unauthorized use by activating the phone lock.
The phone lock may be set to the following:
• On
The handset is automatically locked if not used for the specified automatic lock time or when it is first
turned on.
• On in charger
The handset is locked immediately when placed in the charger. When removed from the charger and
unlocked by the PIN, the handset remains unlocked.
• Off
The handset is never locked.
The default phone lock PIN code (0000) can be changed to any 4–8 digit personalized code.
The length of time before the handset locks automatically is set by the Auto lock time parameter. The
shortest time that can be set before the handset locks is 5 seconds and the longest time is 3 minutes.
If configured in the WinPDM/Device Manager, any one of up to five emergency numbers can be
called while the handset is locked. For more information, refer to the Configuration Manual, Ascom
i63 VoWiFi Handset, TD 93300EN.
Activate the Phone Lock
The phone lock settings are activated from the handset Settings menu in the following way:
1 Select Locks.
2 Select Phone lock.
3 Select Auto phone lock.
4 Select On or On in charger.
5 Enter PIN code.
6 Press OK.
7 Press the Back Soft key twice to return to Locks.
8 Select Auto lock time.
69 TD 93289EN / / Ver.
To Next Page
Loading...
Need help?
General
