PRELIMINARY
USER MANUAL
Ascom i63 VoWiFi Handset
Menu Operation
If the preconfigured headset profiles do not match the headset in use, or the audio performance is bad, an
own headset profile can be configured. This is done in the Device Manager, refer to the Installation and
Operation Manual, Portable Device Manager for Windows (WinPDM), TD 92325EN. If an own profile is
configured in the Device Manager, the profile is selectable in the handset menu.
8.8.3 Network
1 Enter the menu by pressing the Menu Soft key.
2 Select Connections
in the menu.
3 Select Network.
4 Select network in the list. The handset restarts if the
network is changed.
8.8.4 In Charger Action
The behavior of the handset when placed in the charger can be configured.
End Call
The handset can be configured to end an ongoing call when placed in a charger.
1 On the Connections
menu, select In charger.
2 Select Call behavior.
3 Select End call.
Turn Loudspeaker On
The handset can be configured to turn on the loudspeaker when placed in a charger during a call.
1 On the Connections
menu, select In charger.
2 Select Call behavior.
3 Select Loudspeaker on.
Switch the Handset Off
The handset can be switched off automatically when it is placed in the charger. When it is removed from the
charger, it switches on again.
When the handset is switched off in the charger, the Owner ID of the handset is shown. This simplifies the
identification of the handset when, for example, charging it together with other handsets.
1 On the Connections
menu, select In charger.
2 Select Other actions.
TD 93289EN / / Ver. 76
To Next Page
Loading...
Need help?
General
