OPERATING MANUAL
7610-4700-1201
Issue A
6-5
6.20 CHANNEL SCAN
When the radio user is at direct mode channel, it can take the other direct mode channels
to its scanning list and watch if there is a call at any of them. It checks the direct mode
channels that take place in the "channel scanning list" and if there is any broadcast in one
channel, let user to listen to that channel. When any call is received it can respond from
that channel with in scanning delay period (0-10sec). At the end of the time turns back to
its channel and goes on scanning.
Channel scan list can be occurred for all 300 channels or a certain part. At analog usages,
if there is broadcast in more than one channel 2 leveled priority can be given according to
its own priority order. Priority scanning is not valid during digital channels scanning.
While communicating at analog mode, if a call has received from priority channels, radio
passes to the priority channel. 1
st
and 2
nd
priority channel can be defined. If channel list
becomes longer it will take time to turn back to the first channel to check.
Channel scan process is started and ended by pressing scanning button that take place at
the front panel. During this process software keys and keypad (except Scan/Delete key)
become unfunctional.
6.21 GROUP SCANNING
Radio user can listen to the digital/crypted calls received from all groups that it is included
or just the group that it exists at the moment according to the group scanning mode. While
the group scanning is in use at the 2
nd
row of display "*" sign appears near the Group
Number.
6.22 SHORT CUT
All software, hardware, usage info about radio takes place at the menus. All menus are
supported by numerical short cuts. User can reach the required sub menu by entering its
short cut number.
6.23 AUDIBLE ALERTS
Radio gives various audible alerts to inform user. Tones and time periods of each alert
changes.
6.24 LIGHTING ALERTS
Radio gives various lighting alerts to inform user. Red LED lights during transmission,
blues LED lights during receiving. According to the usage requires top panel and front
panel lighting can be adjusted separately for power save.
To Next Page