14 Warranty
The following terms and conditions are applicable to all sales of ASEPCO valves. Any
acceptance by ASEPCO of a purchase order for its valves is hereby made conditional upon
the customer’s acceptance of these terms and conditions of sales; including, in particular,
any that are different from or in addition to or vary the terms contained in the customer’s
purchase order or request for quotation. Such acceptance shall be deemed to occur upon
the failure of the customer to object in writing specifically to these terms and conditions
within 14 days of receipt hereof. No waiver, alteration, or modification of these terms and
conditions whether in the customer purchase order or otherwise shall be valid unless
specifically accepted in writing by an authorised representative of ASEPCO.
Limitations of use
ASEPCO valves are designed for aseptic processing at not greater than their rated working
pressure and within the temperature range designated by ASEPCO. ASEPCO disclaims the
suitability for its valves for applications or types of service other than those for which they
are intended, as indicated in ASEPCO specifications as supplied to the customer. ASEPCO
also disclaims suitability of its valves for any use whatsoever, following an unsuccessful
installation qualification protocol or after service without replacement of the diaphragm in
accordance with ASEPCO recommendations. ASEPCO can only warrant performance when
ASEPCO parts are used.
Warranty
ASEPCO warrants its products against defects in materials or workmanship for a period of
three years from date of shipment for actuators and one year from date of shipment for all
other components, excluding consumables, provided that they are used for a purpose and
in a manner recommended or approved by ASEPCO. Warranty is contingent upon receipt
and evaluation of the product by ASEPCO and determination by ASEPCO that the products
or parts are found to be defective. In such case, the warranty obligation of ASEPCO shall
not exceed the net sales price of the defective product or part. ASEPCO makes no warranty
with respect to the products of other manufacturers which it may sell as part of an ASEPCO
valve assembly.
ASEPCO makes no other warranty of any kind express or implied, and all implied
warranties of merchantability and fitness for a particular purpose that exceed the
aforementioned warranty are disclaimed by ASEPCO and excluded by this warranty.
ASEPCO neither assumes nor authorises any person to assume for it, any other obligation
in connection with the sale of its products. This warranty shall not apply to any products or
parts that have been repaired or altered without prior authorisation by ASEPCO in writing;
or have been subject to misuse of any kind including but not limited to contrary to ASEPCO
instructions or recommendations. ASEPCO shall not be responsible for design defects due to
inaccurate or incomplete information supplied by the customer or its representatives.
Tank valve body guarantee
In addition to the above stated general warranty, ASEPCO offers a lifetime free
replacement of any ASEPCO tank valve body, no matter who breaks it or how it is broken.
Furthermore, if it is proven that a properly assembled ASEPCO tank valve cannot CIP/SIP,
ASEPCO will buy back our tank valve at full purchase price, buy an equivalent replacement
valve per the customer’s specification, and pay the cost of installation in the customer’s
tank.
m-radialdiaphragmvalve-en-02 45
To Next Page
Loading...
Need help?
General
