English
44
1: Drags the recorder bar.
2: Starts voice recording.
3: Pauses voice recording.
4: Plays back voice recording.
5: Stops voice recording.
6: Closes the recorder bar
– Play: For check purposes, select this function to play
back the voice message you’ve just recorded
(equivalent to “4” button on recorder bar)
– Remove: Select this function to delete the existing
voice message. You will use this function when you
wish to record a new voice message for the current
feature.
NOTE: Voice attributes are saved as WAV files in the same
folder as the layer they belong to. The file naming
convention used is Sound#.wav where # is the record
number (1, 2, 3, etc.). The record number is ascribed in
chronological order, with no reference to any other file.
• For a date attribute, the current date is automatically
assigned. To change the date, tap on the Date attribute
and select the new date from the displayed calendar and
then tap OK.
• For a “Yes/No” attribute, the default choice is “No”. Tap
on the attribute name to change the setting and then tap
OK.
Using the Pause/Resume Function
While logging a line or polygon, you may want to pause data
logging because external events require that you do so or you
want to start the logging of a second feature (double logging
feature) (see Double Logging on page 45). Follow the
instructions below.
•Tap Menu>Pause to pause data logging.
13 5
24 6
To Next Page
Loading...