K
Kevin BellSep 7, 2025
What to do about spots left after washing in Asko Dishwasher?
- MMaria RichardsonSep 7, 2025
If your Asko dishwasher leaves spots after washing, especially from lipstick or tea, try using a detergent with a bleaching agent.
To Next PageTo Next PageWhat to do about spots left after washing in Asko Dishwasher?
If your Asko dishwasher leaves spots after washing, especially from lipstick or tea, try using a detergent with a bleaching agent.
How to fix Asko D5644 when the dishes are not clean?
If your Asko dishwasher leaves dishes unclean, start by removing and cleaning the spray arms to ensure they rotate freely. Check that dishes aren't blocking the spray arms. Ensure your detergent isn't too old and dose it correctly according to water hardness. Select a more powerful program or higher temperature. Load dishes correctly, avoiding covering them with large bowls or lids, and ensure glasses and cups are loaded securely. Finally, make sure the filter is correctly fitted and screwed firmly into place.
Why are dishes not dry after Asko D5644 Dishwasher cycle?
If your Asko dishwasher isn't drying dishes well enough, activate the Long dry option. Ensure the dishwasher is fully loaded. Check and top up the rinse aid, or increase the rinse aid dosage. Once the program finishes, open the door slightly to improve drying.
What to do if my Asko D5644 Dishwasher does not start?
If your Asko dishwasher isn't starting, make sure the main power switch is on by pressing and holding it until the display lights up. Also, check that the door is properly closed, no fuses or circuit breakers have been tripped, the plug is securely in the wall socket, the water tap is turned on, and there are no overflow/leaks issues. Also, verify that the Delayed start option hasn't been selected. If a whirring sound is heard and doesn't stop when the power is off, turn off the water tap, pull out the plug, and call the service division.
What to do if water remains in my Asko D5644 Dishwasher?
If your Asko dishwasher has water remaining after a cycle, check the drainage hose for blockages by loosening it at the sink unit's water trap and ensuring no debris is present, also ensure that the cone-shaped part of the pipe is cut to an inner diameter of at least 14 mm. Make sure there are no kinks or sharp bends in the drainage hose. Clean the coarse and fine filters and ensure the filter is completely locked with the handle pointing towards the door. You may need to clean the drainage pump.
What to do if water remains in my Asko dishwasher above the filters?
If your Asko dishwasher leaves water above the filters, loosen the drain hose to check for blockages. Ensure there are no kinks or sharp bends in the drain hose. Clean the coarse and fine filters, and also clean the drain pump to remove any debris.
How to prevent spots on stainless steel in Asko dishwasher?
If you notice spots on stainless steel or silver items after washing in your Asko dishwasher, rinse off foods like mustard, mayonnaise, lemon, vinegar, salt, and dressings from these items if you're not starting the dishwasher immediately. Also, prevent silver and stainless steel items from touching during dishwashing.
How to get rid of bad odor in Asko D5644?
To address a bad odor in your Asko dishwasher, clean around the seals and in corners with a dish brush and low-foaming cleaner. Also, run a program with a higher temperature about once a month, especially if you typically use low-temperature programs.
Why are there spots on stainless steel or silver in my Asko Dishwasher?
If you notice spots on stainless steel or silver items after washing in your Asko dishwasher, it could be due to certain foodstuffs like mustard, mayonnaise, lemon, vinegar, salt, and dressings. Rinse these off before loading, or use the Rinse & Hold program. Also, prevent contact between silver and stainless steel items during washing, as stainless steel can cause spots on silver. Aluminum can also cause spots on dishes.
Why does my Asko D5644 Dishwasher leave a sticky white/blue film?
If your Asko dishwasher leaves a sticky white/blue film on dishes, reduce the rinse aid dosage. Consult the Rinse aid and Settings sections for guidance. For very soft water, consider diluting the rinse aid 50:50 with water.
General| Brand | Asko |
|---|---|
| Model | D5644 |
| Category | Dishwasher |
| Language | English |
Essential rules for safe operation, including handling detergent, sharp items, and supervision.
Precautions for keeping children safe during dishwashing, including handling detergent.
Step-by-step guide on how to activate and deactivate the door child safety lock feature.
Information on activating the child lock for the button controls to prevent unintended operation.
Detailed explanation of the dishwasher's front panel buttons and indicators.
Advice on washing crystal and glass, including temperature and placement.
Step-by-step guide on how to load dishes into the upper and lower baskets for optimal cleaning.
Guidance on adding detergent based on water hardness and compartment usage.
Explanation of Auto wash, Time program, and their usage.
Guide to selecting Temperature, Drying, and Delayed start options.
Steps to enter the dishwasher's settings menu.
How to activate and deactivate the button lock for child safety.
Step-by-step guide for removing and cleaning the coarse and fine filters.
Instructions on how to access and clear the drainage pump.
Steps for refilling the rinse aid compartment and when the indicator lights up.
Overfilling error and action to call service division.
Water outlet fault and troubleshooting steps.
Water inlet fault and checks for water supply.
Causes and solutions for dishes not being clean, including spray arms and detergent.
Addressing spots, films, white/blue film, and spots on stainless steel/silver.
Solutions for when the dishwasher fails to start, checking power, door, and delayed start.
Causes and fixes for water remaining in the dishwasher, including drainage issues.
Details on Australian energy labelling standards and dishwasher specifications.
Emphasizes the need for qualified professionals for electrical, water, and drainage connections.
Warnings about incorrect installation, noise minimization, and protective measures during installation.
Steps to test water filling and draining before final installation.
