Asko DW90 Series - Dw90.3

Service manual DW90
33
Menu step/Turn/Push LCD Comments/instructions
Water intake
S3
Water volume 0
Normal water intake, default setting
Water volume +5%
Water intake increases by +5%
Water volume +10%
Water intake increases by +10%
Water volume +15%
Water intake increases by +15%
Water volume Time 0 Time, flow meter switched off, intake time:
pulse value x 0.068 [s]
Water volume Time +5%
Time-controlled water intake increases by +5%
Water volume Time +10%
Time-controlled water intake increases by +10%
Water volume Time +15%
Time-controlled water intake increases by +15%
S4
LCD contrast
S3
Contrast 00
LCD contrast 0, default setting
Contrast +1
LCD contrast +1
Contrast +2
LCD contrast +2
Contrast -1
LCD contrast -1
S4
TDE
S3
Turbo Drying on
Turbo Drying Express on, default setting
Turbo Drying off
Turbo Drying Express off
S4
Fan sequence
S3
Fan 1 on
Fan works in sequence during the wash cycle, not in normal program,
default setting
Fan 2 on
Fan works in sequence during the wash cycle, even during normal
program
Fan off
No fan sequence during program. Dries the load.
S4
DUO
S3
DUO off
DUO off, default setting
DUO on
DUO on, to activate Sani, Pots & Pans
S4
Region
S3
Region EU
Region Europe (as well as China and Japan), default setting
Region US
Region USA (as well as Taiwan)
Region AU
Region Australia
S4
Service menu
DW90.3 cont.
IRM2,8M2,1
S TA R T
P R O G
S T O P
S5 M1,1 M1,28 S3 S2S4
LCD
I1:1 I7 I8
I1:3
I6
I2:1
I2:2
I3
I10
I4
I5
I1:2 I11 I9