What does error code F9 and/or continuous beep mean on my Asko HI1655G Hob?
Error code F9 and/or a continuous beep on your Asko Hob indicates that the appliance has been connected incorrectly and/or the mains voltage is too high. Let your connection be changed.
What to do if Asko HI1655G shows error code F8 or F08?
Error code F8 or F08 on your Asko hob indicates that the appliance has overheated. The hob was automatically switched off to prevent damage. To resolve this, allow the appliance to cool down completely. After it has cooled, you can start cooking again, but it's recommended to use a lower power setting to prevent future overheating.
What to do if Asko HI1655G shows error code F00?
If your Asko hob displays error code F00, it means the control panel is either dirty or has water on it. To fix this, simply clean the control panel thoroughly.
Why is my Asko HI1655G not working and nothing appears on the display?
If the Asko hob is not working and the display is blank, it indicates a lack of power supply. This could be due to a defective cable or a faulty connection. Check the fuses or the electric switch to ensure that power is being supplied to the hob.
What does error code FAN on Asko HI1655G Hob mean?
If your Asko hob shows error code FAN, it means that the air circulation is not good. To resolve this, ensure that the venting holes located under the cooking plate are open and unobstructed.
What does error code F9 and/or continuous beep on Asko HI1655G Hob mean?
If your Asko hob is displaying error code F9 and/or you hear a continuous beep, it indicates that the appliance has been connected incorrectly or the mains voltage is too high. To resolve this, have your connection changed.
General| Type | Induction |
|---|---|
| Number of Cooking Zones | 5 |
| Width | 60 cm |
| Power Boost | Yes |
| Control Type | Touch |
| Frame type | Frameless |
| Safety Features | Child Lock, Overheat Protection |
To Next Page
