49
REPLACING THE BULB
The bulb is a consumable and therefore not covered by warranty. Before changing the bulb, remove the trays, the grid,
and the guides.
Use a Phillips (cross) screwdriver.
(Halogen lamp: G9, 230 V, 25 W)
1
Use a fl at screwdriver to release the bulb cover and
remove it.
Make sure not to damage the enamel.
2
Remove the halogen bulb.
Use protection to avoid burs.
There is a gasket on the cover which should not be
removed. Do not allow the gasket to be detached from
the cover. The gasket should fi t correctly onto the oven
cavity wall.
To Next Page
Loading...
