12
Using your appliance
Programmed cooking
Cooking with immediate start and
programmed duration
Select the desired cooking mode
and adjust the temperature.
Press the “ ” button until the
cooking time indicator starts to flash
“”.
The display flashes 0:00 to indicate that
you can now adjust the setting.
Press the + or – buttons to set the
desired time.
Example: 30 min. cooking time.
The cooking time is automatically recorded
after a few seconds.
The cooking time display stops flashing.
The countdown of the cooking time begins
immediately after it has been set.
After these three steps, the oven heats
up:
A series of beeps will sound when the oven
reaches the selected temperature.
At the end of cooking (end of programmed
time),
- the oven turns off,
- the cooking time indicator and 00:00 both
flash,
- a series of beeps sounds for a few
minutes.
Press any button to stop the beeping.
The display shows the time once again
when the function selector switch is
returned to 0.
3
2
1
To Next Page
Loading...
