19
The Cleaning function
Cleaning the outer surfaces
To clean both the electronic programmer
window and the oven door, use a window
washing product applied to a soft cloth.
Do not use abrasive creams or scouring
sponges.
Cleaning the door (model WITH
PYROLYSIS function)
Disassembling the door
Warning
Before removing the glass, allow the
appliance to cool down.
Open the door completely and block
it open using the two red stops.
They are supplied with your
machine in the plastic pack.
Remove the first attached window as
follows:
Insert the two red stops in the A slots
designed for this.
Lever these parts to release the glass.
Clean the glass using a soft sponge
and washing-up liquid.
Do not immerse the glass in water.
Do not use abrasive creams or scouring
sponges. Rinse with clean water and dry
off with a lint-free cloth.
Warning
Do not use abrasive cleaning products
or hard metallic scrapers for cleaning
the oven’s glass door, as they could
scuff the surface and cause the glass
to shatter.
3
2
1
A
A
To Next Page
Loading...
