Asko OP8620 - Delayed Pyrolysis

18
Notes
The cleaning temperature cannot be
adjusted. During the pyrolysis cycle, the
oven lighting is off. If your oven is not clean
after a pyrolysis cycle, you waited too long
before launching a cleaning cycle. Repeat
the cycle.
Delayed pyrolysis
Follow the instructions described in
the section “Immediate pyrolysis”,
then:
Turn the function selector to the
desired pyrolysis setting.
Press the button.
The end of cooking symbol flashes
to indicate that it is now possible to
set it.
Press the + or – button to set the
desired end time.
After these steps, the beginning of
pyrolysis is delayed so that it finishes at
18:00.
When the pyrolysis cycle is over, return the
function selector to stop.
Warning
During Pyrolytic Cleaning the Oven
becomes very hot. Allow extra time
making sure the oven has cooled
sufficiently before opening the door.
4
3
2
1
Caring for and cleaning your oven