Askoll NGS3 - Power Regeneration Mode Selection; Battery Safety and Disposal

27
USE
EN
EN
EN
EN
EN
Power regeneration mode selection
During scooter deceleration, the battery can be
automatically recharged by activating the power
regeneration mode.
Use the 2 position turn indicators switch to activate or
deactivate power regeneration:
The power regeneration mode is activated
and deceleration increases pressing the
button upwards.
The power regeneration mode is deactivated
pressing the button downwards.
Combining braking with deceleration, charging will be
greater.
When power regeneration mode is activated, charging
warning light is on.
With a high level of battery charge, power regeneration
mode is not activated.
NGS3NGS1 - NGS2
NGS_Rev00_EN.indb 27NGS_Rev00_EN.indb 27 05/06/2020 11:28:1905/06/2020 11:28:19