EasyManua.ls Logo

Askoll NGS3 - Front Brake Fluid Level Check

Default Icon
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
51
ADJUSTMENTS AND PERIODIC MAINTENANCE
EN
EN
EN
EN
EN
FRONT BRAKE FLUID LEVEL CHECK
The front brake fluid reservoir is equipped with an
inspection window to control the level in the tank.
To check the fluid level the tank, it is possible to look
through the inspection window through the slot at the
front right of the handlebar cover.
If the brake fluid level is low or insufficient, DO NOT fill
the reservoir but check the brake pads and brake disc
for wear and any leaks in the brake circuit.
WARNING
The brake fluid is hygroscopic, i.e. It absorbs moisture from the surrounding air. If
the moisture in the fluid exceeds a certain value, the braking will be inefficient.
WARNING
It is advisable to change the fluid every 2 years, never use brake fluid from partially
used or open containers.
WARNING
Check that only DOT4 brake fluid is used.
WARNING
The brake circuit fluid has a high corrosive power. Do not allow it to come into
contact with skin or painted parts. In case of contact with the skin, wash with plenty
of water.
NGS_Rev00_EN.indb 51NGS_Rev00_EN.indb 51 05/06/2020 11:28:5105/06/2020 11:28:51

Table of Contents

Other manuals for Askoll NGS3

Related product manuals