Operating the F100
F100-14-001.2 Page 4-13
ASL 2005
The minimum, maximum, mean, standard deviation and total number of readings are displayed on this
screen
10
. Select Clear to immediately clear and restart the statistical calculations.
4.1.3.6 Settings menu
The settings menu allows the various other instrument parameters to be set.
a) Brightness
Selecting this option allows the brightness of the LCD backlight to be adjusted. Use the Enter key
once you are happy with the backlight intensity. Use the Clear key to exit without altering the s et value.
The current value, set by the Up/Down keys, is shown in the middle of the display (56 in this case);
values r ange from 0 (off) to 100 (full brightness).
Note
Do NOT leave the instrument for any length of time with this
menu selection on (it is the only one menu where the
backlight is on continuously).
Note
When the F100 is battery operated, using the backlight will
dramatically reduce battery life. The current used increases
as the backlight intensity rises.
b) Timeouts
The F100 can be set to timeout after a preset period (to save battery life); by default the timeout is off.
Selecting this option allows the various timeout values to be set. Use the Up and Down keys to select
the required timeout and then press the Enter key to select it (or use the Clear key to return to
previous menu, or the Menu key to return to the Measurement Menu).
10
Statistical values are also displayed (continuously updated) on t he Measurement Menu screen when the clear button
is pressed while t he F100 is displaying measurements.
%U LJ KWQHV V
%U LJ KWQHV V%U LJ KWQHV V
%U LJ KWQHV V
7L PH RXWV
7L PH RXWV7L PH RXWV
7L PH RXWV
7L PH 'D WH
7L PH 'D WH7L PH 'D WH
7L PH 'D WH
$' & 0RGH
$' & 0RGH$' & 0RGH
$' & 0RGH
6H W E
6H W E6H W E
6H W E U LJ KWQHV V
UL JK WQHVVUL JK WQHVV
UL JK WQHVV
XV H 8S'R ZQ N H\V
XV H 8S'R ZQ N H\VXV H 8S'R ZQ N H\V
XV H 8S'R ZQ N H\V
$Q \
$Q \$Q \
$Q \ NH \ WR H[ LW
NH \ WRH[ LWNH \ WRH[ LW
NH \ WRH[ LW
To Next Page
Loading...