Operating the F100
Page 7-1 F100-14-001.2
ASL 2005
7. Calibrating the F100
7.1 F100 Instrument calibration
The dc bridge measurement technique used in the F100 is inherently very stable and linear. H owever
some small drift of the internal reference res istor may occur with time, making periodic instrument re-
calibration advisable.
7.2 Equipment
Temperature controlled environment at +20°C ±2°C.
Set of stable, calibrated (1ppm) resistors (3 ranges, 6 resistors).
7.3 Calibration procedure
See separate documentation.
To Next Page
Loading...