ASL INTERCOM F100 - 9 Options and Accessories; Accessories

Smart Probes
F100-14-001.2 Page 9-3
 ASL 2005
9. Options and Accessories
9.1 Accessories
The following options are available for the F100 –
Part Number Description
F100 Battery Pack Spare battery pack
FA-SMART Smart connector
FA-DIN5 5-pin DIN plug
FA-ADAP-250
Adaptor box to allow connection to spade
terminal or free wire terminated PRTs
F100-CAL-A
UKAS system calibration at
-50, 0, +100 & +250°C
F100-CAL-B
UKAS system calibration at
-70, 0, +100 & +450°C
FA-SC100 Soft carry case
EXT-C Probe extension cable (DIN/DIN)
A range of standard probes are available –
Order Suffix Description
T100-200-1S
100
 un-calibrated PRT range –50 to +200°C
Smart connector
T100-200-1S-NAM
100
ҏ PRT UKAS calibration at –50 to +200°C
Smart connector
T100-250-1S
100
 un-calibrated PRT range –50 to +250°C
Smart connector
T100-250-1S-NAM
100
ҏ PRT UKAS calibration at –50 to +250°C
Smart connector
T100-450-1S
100
 un-calibrated PRT range –70 to +450°C
Smart connector
T100-450-1S-NAM
100
ҏ PRT UKAS calibration at –70 to +450°C
Smart connector
For non-Smart (i.e. Passive probe) versions of the above, substitute a ‘D’ suffix in place of the ‘S’.
For example, T100-450-1S-NAM becomes T100-450-1D-NAM if the Smart connector is not
required.