Operating the F100
Page 4-20 F100-14-001.2
ASL 2005
Type Probe type PRT or Thermistor
Wire Indicates the probe sensor connection details
Conv Selected method of resistance to temperature conversion algorithm to use, DIN,
ITS90, CvD or Steinhart and Hart (for thermistors)
Second LCD Screen
Serial No Serial number of the Smart probe
Source Company that carried out the Smart probe calibration
Third LCD Screen
Cal date Date of the Smart probe calibration
Due date Date the Smart probe calibration is next due
Fourth LCD Screen
Min limits Minimum resistance limit for the probe
Max limits Maximum resistance limit for the probe
Fifth LCD Screen
Min since Minimum recorded resistance the Smart probe has been exposed to since it was last
calibrated
Max since Maximum recorded resistance the Smart probe has been exposed to since it was last
calibrated
Sixth LCD Screen
Min ever Minimum recorded resistance the Smart probe has been exposed to during its working
life
Max ever Maximum recorded resistance the Smart probe has been exposed to during its
working life
To Next Page
Loading...