SECTION 9 SPECIFICATIONS AND WARRANTY
_______________________________________________________________________
9-6
9.2.2 IEC 60601-1-2:2001 Electromagnetic Compatibility
Guidance
This section provides the appropriate specification tables for the BIS VISTA Monitoring
System as per IEC 60601-1-2.
Guidance and Manufacturer’s Declaration - Electromagnetic
Emissions
The BIS VISTA Monitoring System is intended for use in the electromagnetic environment
specified below. The customer or user of the BIS VISTA system should assure that it is used
in such an environment
Emissions test Compliance Electromagnetic
Environment -
Guidance
RF Emissions
CISPR 11
Group 1 The BIS VISTA Monitoring
System uses RF energy only
for its internal function.
Therefore, its RF emissions
are very low and are not likely
to cause any interference in
nearby electronic equipment.
RF Emissions
CISPR 11
Class A
Harmonic Emissions
IEC 61000-3-2
Class A
Voltage Fluctuations/
Flicker Emissions
IEC 61000-3-3
Complies
The BIS VISTA Monitoring
System is suitable for use in all
establishments, other than
domestic and those directly
connected to the public low-
voltage power supply network
that supplies buildings used
for domestic purposes.
Caution:
The BIS VISTA system should not be used adjacent to or stacked with
other equipment. If adjacent or stacked use is necessary, the BIS
VISTA monitor should be observed to verify normal operation in the
configuration in which it will be used.
To Next Page
Loading...