18
6. Basic Operations
Powering the device
Hold the red hang-up/power button for ve seconds. Once the screen lights up with the Aspera logo,
let go of the button. The phone may take some time to initialise. This is normal and you may need to
wait for a while.
Charging the device
Ensure the wall plug has been placed into a working outlet and the power switched on. Connect the
larger end of the USB/Charger cable to the wall plug, then connect the smaller end to the right side of
the phone.
We recommend charging the phone only when the battery is near empty, or when necessary. It will
take three to four hours for the battery to charge from depleted to full.
To Next Page
Loading...
