33
Writing Messages
Please note that you may need to change between different input methods in this section. To do so,
use the hash (#) key to cycle between input methods when on a eld which you can type in.
• Ensure you have opened the Messaging application as per instructions above.
• Press the left-hand context button labelled as “Options”
• “New Message” is the rst option highlighted, press the select key
You will land onto a new screen, with your cursor highlighted over the Name/Number input eld for the
contact. There are multiple methods to choose a contact:
• If you do not have the contact saved, you can enter in the number using the “123” input method.
Once this number has been entered, you can shift the cursor to the text message eld by pressing the
down arrow key twice.
• If you do have the contact saved, you can enter what their name using the “abc” input method. You
will see their name come up underneath, with their number showing. To choose this particular contact,
use the down and up arrow keys to highlight the correct contact, then press the Select key.
To Next Page
Loading...
