ASPERA Jazz 2 - Wi-Fi

You can also choose whether your phone vibrates when receiving a call by switching on or off this option below the volume bars.
Underneath these settings, you will find “Do Not Disturb”. You can find more information about this feature in the section below.
“Shortcut to prevent ringing” is used to either place the phone on vibrate only, or completely muted by pressing the volume up and power key together for one second. This can be turned off or
changed to your choosing.
You can access further volume settings by tapping into Advanced. This will allow changes to:
●Notification ringtones
●Alarm ringtones
●Ability to change other sounds and vibrations (dial pad tones, touch sounds, vibrate on tap, etc.)
The second method to quickly change your ringtone and associated volumes is to press the volume buttons on the right side of the phone when your phone is unlocked. To do so:
●Press the volume buttons.
●This will briefly show a volume notification at the top of the screen, with an arrow on the right-hand side of this notification. Press this arrow to show additional volume settings to change.
●To change the setting, hold one finger on the button on the slider, and move it to the direction you choose. Going to the left decreases the volume, going to the right increases the volume.
●Once you are satisfied with level, release your finger from the screen.
●Note: If you do not interact with this sound notification for a short while, it will disappear, and you will have to begin the process from the start again.
You can change the phone ringtone to one of your choosing by tapping on Phone Ringtone, and then selecting the ringtone you would like.
Wi-Fi
●Open the Applications Menu and select the Settings applications
●Select Network & Internet, then select Wi-Fi. Ensure that it is turned on at the top, then it will automatically search for wireless networks around you.
●The strength of the wireless network is indicated to the left of the network name. If the wireless network is secure and requires a password, a padlock icon will show to the right of the wireless
network name.
●To connect to a wireless network, tap on the network name. If it is a secure network, it may prompt you to enter a password, which you will need to do so before selecting connect.
●Once you are connected, you will be able to see a wireless network indicator at the top right-hand corner of the screen, next to the battery and mobile network.
22