“Do Not Disturb” Feature
Do Not Disturb is a feature present inside Android, which blocks all notification and ringtone noises except for alarms.
To turn on/off:
●Go into the Settings application and select Sound.
●Select Do Not Disturb
●Scroll to the bottom of the screen and tap “Turn on Now” or “Turn off Now”
You can also enable and disable Do Not Disturb by accessing the Notification and Quick Settings Panel and tapping on the Do Not Disturb icon, located to the left of the flashlight.
Expandable Storage
The Aspera Jazz 2 comes with the ability to insert a micro-SD card up to the size of 64GB to expand the storage space on the device. This micro-SD card can be used in two different ways and
will need configuration before it can be used.
When the micro-SD is first inserted, a notification will appear, asking you to tap it to setup.
●Tap this notification to transition to a screen on how you would like to use the SD card.
●You can choose to either use the SD card as extra phone storage or as portable storage.
●Electing to use the SD card as extra phone storage will format and delete everything off the storage card, and you will be able to use this storage space for applications and media files on this
phone ONLY
●Electing to use the SD card as portable storage will only allow the SD card to be used to move media files (photos, music, videos etc.) but will not requiring formatting and can be used over
multiple devices.
●Tap on the required selection, follow the prompts, and the SD card will be ready for use.
USB Tethering and Computer Connection
You can use the USB connection to transfer files and internet tether with the Aspera Jazz 2.
To transfer files to and from your Aspera Jazz 2:
●Connect your Aspera Jazz 2 to a Windows-based computer with the USB cable.
●Once connected, unlock your phone and access the Notification Panel.
●Find the notification that states, “Android System – charging this device via USB”. Tap on this notification to enter an options page.
●You will find multiple options under here. Under “Use USB for”, choose “Files Transfer”.
25
To Next Page
Loading...
