Basic Functionality
Locking and Unlocking your Device
Locking the device when not in use prevents accidental operation of the screen and preserves battery time. To lock the device:
●Press the lock button on the right side of the Aspera Jazz 2 once when the screen is open and displaying images. This will switch off the screen and restrict any inputs from being made on
the screen.
To unlock the device:
●Press the lock button on the right side of the Aspera Jazz 2 once to wake up the screen. Upon waking up the screen, swipe up from the bottom of the screen.
●If you have placed a PIN/password/swipe pattern as a lock, you will need to input the PIN/password/swipe pattern set to unlock the device and access the Home Screen.
The phone screen will automatically shut off after 1 minute of in-activity. To change this time, please proceed to section “Display and Screen Options”.
Notifications
Notifications will appear on the screen when turning on the screen, alerting you to any potential changes to your device and/or applications.
You can interact with these notifications from here by tapping on them twice.
To get rid of a notification, hold one finger on the notification, and slide right.
When the device is unlocked, you can access your notifications within the Notification and Quick Access Panel. Please see the above-mentioned section for instructions.
Applications
Your Aspera Jazz 2 will come with many applications installed, many of them critical for the functionality of the phone. We ask that you do not disable or uninstall them, as they may be critical
for the device to perform as expected.
If you wish to uninstall and/or disable certain applications, please contact our customer support to see whether they are integral to the functionality of your device.
To install applications:
●You will need to use the Play Store to install additional applications. You can find instructions in the section titled “Installing and Updating Applications” below.
15
To Next Page
Loading...
