•Inside the Clock application, select the Alarms icon in the top left-hand corner of the screen
•Press the red plus button at the bottom of the screen
•Select the time you wish for the alarm to ring by moving the hands on the clock. You can change between hour and minutes by tapping on the hour and minute at the top.
•You can change between AM and PM by tapping on the relevant option.
•Select “OK” when you are happy with the set time.
To enable/disable an alarm:
•Tap the button to the right of the alarm. Greyed out means it is disabled, red means it is enabled.
To edit an alarm and additional settings:
•Tap on the arrow located to the bottom right-hand side of where the alarm is, just underneath the button to enable and disable an alarm.
•This will bring up additional settings, including whether to repeat an alarm for certain days, the alarm tone, and whether you would like for it to vibrate upon ringing.
•You can also delete the alarm by tapping the delete button and icon located at the bottom of the additional settings.
Calendar
The Aspera Jazz 2 uses the Google Calendar, which can synchronise events to your phone and computer if you have an applicable account to use with them.
You can also use the calendar offline.
To access the calendar:
•Open the Applications menu and select Calendar application
•Pass through the information pages by pressing on the arrow key in the bottom right-hand side of the screen.
Once you have landed in the calendar, you can add events by tapping on the “plus” icon in the bottom-right hand corner. From here, you can fill in the required information.
You can scroll between the dates by swiping your finger vertically.
To view further information about information saved into the calendar on a date, simply tap once on the title of the entry. From here, you can view additional information, edit, or delete the
event.
For further documentation and instructions on how to use Google Calendar, please use the resource linked below:
https://support.google.com/calendar/?hl=en#topic=3417926
28