GENERAL ADVICE
√When the appliance is not being used, it is advisable to keep
the gas tap closed.
√If the gas tap becomes stiff,it is necessary to dismount it
accurately ,clean it with gasoline and spread a bit of special
grease resistant to high temperatures on it.This operation must
be executed by a qualified technician.
TRIPLE RING BURNER
The triple ring burner must be correctly positioned(seen fig.7);the
burner rib must be enter in their logement as shown by the
arrow.
The burner correctly positioned must not rotate(fig.8).
Then position the cap A and the ring B(fig.8).
CLEANING THE TRLPLE RING BURNER
Pay special attention to this burner:the four holes around the
outside of the crown must always be kept clean.
When cleaning ,remove the flame divider (fig.9)and use a cotton
bud,toothbrush,or some other item to clean out any incrustations
or dirt from the four holes marked.“H”(fig.10).
This procedure is necessary to ensure the burner functions
correctly.
To Next Page
Loading...