SETTLING THE HOB FOR INSTALLATION
Every cooker top is provided with a set of tabs for fitting to the
unit with thickness from 3 to 4 cm and a seal with adhesive on
one side.
-Remove burners and grids.
-Turn the cooker top over and rest the glass side on a cloth.
-Apply the self-adhesive seal “G” as illustrated in fig.14.
-Slot the cooker top into the unit and position.
-Position the cooker top in the recess and secure by means of
the brackets as shown in fig.15(for 3 or 4 cm thick work top).
To Next Page
Loading...