EasyManua.ls Logo

ASR emitter - Receiving the ASR Emitter - First moves; Setting up the ASR Emitter

ASR emitter
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ASR Audiosystems Friedrich Schaefer, D-35727 Herborn, Germany
High End Integrated Amplifier ASR Emitter Page 2
Dear music lover,
all of us at ASR would like to offer thanks and congratulations to you for purchasing
the ASR Emitter High End Integrated Amplifier. We sincerely believe that your ASR
Emitter will bring you many years of musical pleasure and enjoyment.
All ASR products are handmade with greatest care to details and with high-grade selected
parts. Enjoy your music even more with this true High End Integrated Amplifier!
While every new owner ist anxious to begin listening, we encourage you
to take a few minutes to read this manual and familiarize yourself with
the full capabilities of the ASR Emitter.
2001 Klaus Henkes (http://www.hifihenkes.de) for ASR Audiosystems
1.0 Receiving the ASR Emitter – First moves
1.1 Unpacking the ASR Emitter
Use care in unpacking your ASR Emitter. Inspect it for any shipping damage and call your
dealer immediately if any is found. Do not plug your ASR Emitter into an AC outlet if
you find shipping damage.
Accessories
Provided with the ASR Emitter are the following asseccories:
a) Integrated amplifier ASR Emitter
(main unit with three golden or chromium control knobs
b) Separate power supply (ASR Emitter I = one, ASR Emitter II = two)
(no controls) incl. one/two shielded ASR powercord(s)
c) Repair-set
(consisting of: 1x 3 mm-Inbus-wrench, replacement srews M4 x 16,
replacement fuses 1 Amp/slow for the battery power supply)
d) Care-set
(consisting of: 1x bottle of antistatic plastic-cleaner and a special cloth
e) (available only for the ASR Emitter Exclusive versions)
Battery Power Supply
(no controls) incl. one powercord
1.2 Setting up the ASR Emitter
Check to make sure, your ASR Emitter has been manufactured for operation at your
AC line voltage. Attempting to use your ASR Emitter at any voltage other than the
specificated on the battery power supply´s back side may damage the unit. Damage
caused by improper operation is not covered by ASR warranty. If the voltage
specified is different from your AC voltage, contact your ASR dealer.

Other manuals for ASR emitter

Related product manuals