ASROCK GENOAD8X-2T/BCM - Page 65

GENOAD8X-2T/BCM
58 59
English
Out-of-Band Mgmt Port
Microsof t Windows Emergency Management Services (EMS) allows for remote
management of a Windows Server OS through a serial port.
Terminal Type EMS
Use this to select the preferred terminal emulation type for out-of-band management.
It is recommended to select [VT-UTF8].
Option Description
VT100 ASCII character set
VT100+ Extended VT100 that supports color and function keys
VT-UTF8 UTF8 encoding is used to map Unicode chars onto 1 or more bytes
ANSI Extended ASCII character set
Bits Per Second EMS
Use this to select the serial port transmission speed. e speed used in the host computer
and the client computer must be the same. Long or noisy lines may require lower
transmission speed. e options include [9600], [19200], [57600] and [115200].
Flow Control EMS
Use this to set the ow control to prevent data loss from buer overow. When sending
data, if the receiving buers are full, a "stop" signal can be sent to stop the data ow. Once
the buers are empty, a "start" signal can be sent to restart the ow. Hardware ow uses
two wires to send start/stop signals. e options include [None], [Hardware RTS/
CTS], and [Soware Xon/Xo].
Data Bits
Parity
Stop Bits