ASROCK GENOAD8X-2T/BCM - BMC Network Configuration

80 81
English
3.5.1 BMC Network Conguration
Bonding Setting
Select this item to enabled or disabled bonding. Please enable all lan channel rst when
want to enable bonding.
Lan channel (Failover)
Manual Setting IPMI LAN
If [No] is selected, the IP address is assigned by DHCP. If using a static IP address, toggle
to [Yes], and the changes take eect aer the system reboots. e default value is [No].
Conguration Address Source
Select to congure BMC network parameters statically or dynamically(by BIOS or BMC).
Conguration options: [Static] and [DHCP].
Static: Manually enter the IP Address, Subnet Mask and Gateway Address in the BIOS for
BMC LAN channel conguration.
DHCP: IP address, Subnet Mask and Gateway Address are automatically assigned by the
network's DHCP server.