ASROCK GENOAD8X-2T/BCM - BMC Tools

GENOAD8X-2T/BCM
82 83
English
3.5.3 BMC Tools
KCS Control
Select this KCS interface state aer POST end. If [Enabled] us selected, the BMC will
remain KCS interface aer POST stage. If [Disabled] is selected, the BMC will disable KCS
interface aer POST stage
Restore AC Power Loss
is allows user to set the power state aer an unexpected AC/power loss. If [Power O]
is selected, the AC/power remains o when the power recovers. If [Power On] is selected,
the AC/power resumes and the system starts to boot up when the power recovers. If [Last
State] is selected, it will recover to the state before AC/power loss.
Load BMC Default Settings
Use this item to Load BMC Default Settings