ASROCK GENOAD8X-2T/BCM - Exit Screen

GENOAD8X-2T/BCM
88 89
English
3.8 Exit Screen
Save Changes and Exit
When selecting this option, the following message “Save conguration changes and exit
setup?” will pop-out. Press <F10> key or select [Yes] to save the changes and exit the UEFI
SETUP UTILITY.
Discard Changes and Exit
When selecting this option, the following message “Discard changes and exit setup?” will
pop-out. Press <ESC> key or select [Yes] to exit the UEFI SETUP UTILITY without saving
any changes.
Save Changes
When selecting this option, the following message “Save changes?” will pop-out. Press
<F7> key or select [Yes] to save all changes.
Discard Changes
When selecting this option, the following message “Discard changes?” will pop-out. Press
<F7> key or select [Yes] to discard all changes.
Load UEFI Defaults
Load UEFI default values for all the setup questions. F9 key can be used for this operation.