Assa Abloy 1385 - Menu Structure and Settings

35
ye
ye
ye
ye
rdrd
rd rd
 Open the protective cover on
the escape door module and
leave open.
 The tamper alarm will be
triggered.
Note
The tamper alarm must remain active in order to access configuration
mode.
gn
gn
gn
gn
ye
gn
g
gn
n
gn
g
g
gn
 Turn the key to the left
 The audible signal will stop.
 The 4 green LEDs flash in pairs
in a diagonal sequence.
 The lower yellow LED will light
up.
5 s

gn
gn
gn
gn
 Turn the key to the left and
hold for five seconds.
 Three green LEDs light up.
 The lower right-hand green LED
flashes.
5 s

ye
ye
ye
ye
The display will change after five
seconds.
 The four yellow LEDs light up.
 The configuration mode is now
switched on.
Starting config-
uration mode