7
Our devices are carefully packed to ensure adequate protection during
shipment.
When you receive your device, you must check the device and its packag-
ing to ensure it is complete and undamaged.
Risk of injury
The device must not be used if it is damaged.
Damaged cables and connector assemblies also represent a safety hazard
and must not be used.
Packaging materials must be recycled. Local environmental protection
regulations must be complied with.
The device is designed to provide an escape door control system. It can
be operated as a stand-alone control unit or within a building network
(
1385
only). It is not intended for any other type of use.
Note
Device
1384
is designed as an offline unit and cannot be extended.
Device
1385
can be used as a stand-alone or networked unit. An E/A
extension module can be connected in stand-alone mode.
We provide a warranty for this device valid from the date of purchase in
accordance with statutory/country-specific regulations. If any damage is
incurred, the unit will be repaired or a replacement supplied.
Any damage caused through natural wear, overloading or incorrect use
are excluded from the warranty.
Packaging and
storage
To Next Page
Loading...