Assa Abloy Corbin Russwin CL3500 Series User Manual

FM237 03/19
Installation Instructions
Copyright © 2012, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-607-5703 • techsupport.corbinrusswin@assaabloy.com
WARNING
This product can expose you to lead
which is known to the state of California
to cause cancer and birth defects or other
reproductive harm. For more information
go to www.P65warnings.ca.gov.
CL3500 Series
ANSI/BHMA Grade 1
Key-In-Lever
Cylindrical Lockset

Assa Abloy Corbin Russwin CL3500 Series Specifications

General

Brand	Assa Abloy
Model	Corbin Russwin CL3500 Series
Category	Locks
Language	English

Summary

Standard Installation

Install Latchbolt, Lockbody and Inside Trim

Installs the latchbolt, lockbody, and inside trim components for the lockset.

Door and Frame Preparation

Mark Door

Locates and marks horizontal center line and backset for hole placement on the door.

Drill Door

Drills required holes for latch, bolt, and cylinder on the door.

Install Strike

Installs the door frame strike plate and securing screws.

Optional Installations

For CL3580 and CL3581 Function Only

Details specific optional installations for CL3580 and CL3581 lockset functions.

Cylinder Installations

Interchangeable Core Installation

Guides on installing an interchangeable core into the lockset lever assembly.

Interchangeable Core Removal

Instructions for removing an interchangeable core from the lockset lever assembly.

Standard Cylinder Installation

Procedures for installing standard cylinders, including 6-pin and 7-pin types.

Conversion Kit

Details on converting Schlage cylinders for use with the CL3500 lockset.

Lever Removal Installation

Push / Turn Button Lever

Procedure for removing and installing levers with a push/turn button feature.

Plain Lever

Instructions for removing and installing plain lever handles.

Cylinder Lever

Steps for removing and installing levers that incorporate a cylinder.

Interchangeable Core Lever

Procedure for removing and installing levers with an interchangeable core.